通用数控等离子切割机

Messer 切割 Systems offers CNC 等离子切割机器 & oxyfuel cutting machines designed to make any job quick and easy to complete. 超过100年的公司和行业历史, Messer 切割 Systems has established itself as a leader in 等离子切割机器. Many technological milestones have become the industry standard – a “Benchmark“ – for cutting technology.看看我们的CNC和general吧 等离子切割机器

泰坦III数控等离子切割机

The Titan III combines Y-Axis linear ways with SureTrack pitch line rack and pinion drives to provide the smoothest cut edge and precise holes. Wider end trucks with maximum guide roller spread further stabilizes the X-Axis motion for the utmost cut edge performance. Designed for plasma and oxy-fuel cutting, marking and drilling up to 1/2″ (.1524 mm) the Titan III can be configured with many additional options

特性和好处

  • 切割宽度:6 '至16 ' (1.82米至4米.876 m).
  • 切割长度:高达150 ' (45.72 m).
  • 机器运动精度+/- .010″ (.254毫米)的准确性, .010″ (.254毫米)重复性. (补偿机器运动在72″(1.82 m).
  • 切割材料形式26个规格到8″(203.2毫米)板厚.
  • 定位速度高达1,700 ipm.
  • 轮廓速度高达400ipm.
  • Global Control PLUS Windows™ based with easy to use operator interface with touch screen.
  • Virtual 服务™ remote consultation and diagnostics.
  • 高产SL升降机.
梅塞尔集团泰坦三世

tmc4500db数控等离子切割机

The TMC4500 DB are heavy-duty CNC 等离子切割机器 built for state-of-the-art performance in the rigorous environment of fabrication shops and service centers. Box beam steel construction results in a stiff backbone to the gantry frame. Hardened and ground ways support even the heaviest cutting carriages and provide long life. x轴轨道从坚韧的115磅加工./yd. crane rail to support and guide the cutting operation. The TMC4500 DB comes with the 24″ Global Control Plus, the most advanced CNC control system on the market.

梅塞尔集团TMC4500 DB

特性和好处

  • 切割宽度从12 ' (3.657米至28英尺(5英尺).534m)
  • 切割长度可达200 ' (60.96m)
  • 钻至4″(101.6毫米)直径和攻丝可达1 1/2″(38.1毫米)直径
  • 重型,机械115磅./yd.用于x轴运动的起重机导轨
  • Welded steel end trucks with precision machined mating surfaces and with tolerances of .002″ (.0508毫米)维护
  • Massive dual gantry process beams provide superior bending, and torsional strength for any tool combination selected
  • Precision Linear Y-Axis way system with wide spacing to provide rigid support of any process too
  • Global ControlPLUS, Windows® based with easy-to use operator interface
  • 控制滑动安装可选眩光窗帘
  • Virtual 服务™ remote consultation and diagnostics
  • 定位速度高达1400 ipm
  • 机器运动精度±0.015″在72″旅行与 .010″ repeatability measured with a laser interferometer
  • Machine service power track in both X, and Y axis
  • High-speed Messer 切割 Systems programmable lifters (880 ipm plasma, 150 ipm oxy-fuel)
  • Designed and manufactured in the USA to machine tool and ISO 230-2 standards

梅塞尔集团Platemaster二世

梅塞尔切割系统的板材大师II is an economical solution for plate cutting needs. Rugged floor-mounted rails are machined from 90 lb/yd crane rail stock and heavy, internationally gusseted end trucks support the dual box beam for smooth motion.

The PlateMaster II can support two high performance plasma systems and up to six oxyfuel systems including the ALFA Oxyfuel Torch which has integrated ignition and probeless  height control. All torch systems are suspended by the Messer PL-1 with SureStop Collision Sensor and the EL-170 of torch lifters they are both rugged, 高速, low maintenance and provide rigid torch support for the smoothest cut finish. 

配备了全球控制系统, 与一个易于使用的, 功能丰富, operator interface allows employees to become expert operators in minutes.

  • 高达800安培,等离子体
  • 氧燃料切割
  • 以1400ipm的速度传播
  • 宽度从8 '到12 ' (2.5米3.长度从10 '到72 '(3米到21.9456m)
  • 工具覆盖范围:宽度从6 '到12 ' (1.82到3.657m) with full coverage of plate with first four torch stations. 标准长度从13 '到72 '(4米到21.9456m) [conditionally expandable in 3′-4″ (1m) and 6′-8″ (2m) increments, based on selected options]
  • 材料厚度:26ga. 到6″(52mm)取决于等离子体
  • 1/8″至12″(3mm至305mm)含氧燃料
  • Materials processed: mild steel, stainless steel and aluminum
  • GlobalControl
  • The PlateMaster II is designed and manufactured in the USA
梅塞尔切割系统的板材大师II

梅塞尔集团EdgeMax数控等离子切割机

The EdgeMax cnc 等离子切割机器 sport a rugged unitized steel table/frame, full capture bearing assemblies and a low mass aluminum beam driven by dual brushless AC motors, 提供快速的加速度, precise motion and a very stable cutting platform.

  • Powered by the Messer Global ControlS™ with touch screen interface
  • 使用坚固的统一钢桌子/框架
  • Tool Coverage: 6’x12′, 6’x24′, 8’x12′, 8’x24′, 10’x12′ and 10’x24′ (1.8 m 7.3m)
  • 材料厚度:26ga. 到3″(76mm)取决于工艺
  • Materials Processed: Steel, Stainless Steel and Aluminum
  • 可选EdgeMax H20水表
  • 可选-一个等离子体高达400安培
  • Optional – One Turbo Flame™ Oxy-fuel 切割 Torch
梅塞尔集团EdgeMax

梅塞尔集团MetalMaster 2.0台CNC等离子切割机

Are you looking for an economical machine which gives full power in a small area? For simple plasma cuts, just oxyfuel or also both combined? 新的金属大师2.0 you will get Messer quality at a unique value for money Price.

Thanks to the space saving, compact construction the machine can be installed quickly. Leveling screws make child’s play of alignment on a flat surface. Bilateral longitudinal drives with precision guiding system maintains accuracy over long periods of use. Positioning speeds of up to 35 m/min positioning and a fast, intelligent torch lifter minimize non-productive times.

  • 100%梅塞尔,美国制造
  • 对于血浆高达2″
  • 对于oxyfuel切割
  • 定位速度可达1300米/分钟.
  • Integrated cutting table with fume extraction, flat bed machine
  • Fast loading and unloading as the table is accessible from all sides
  • 快速火炬升降机(16米/分钟.) with CNC controlled Z axis for process optimization
梅塞尔集团MetalMaster 2.0